BEKO BDFS16030W handleiding
Handleiding
Je bekijkt pagina 19 van 52
EN / 19
You can put approx. 2 kg of soften-
ing salt in the salt compartment.
1. When the compartment is full, replace
the lid and close by turning.
Adding salt should be performed
just before starting the dishwasher.
In this way, the overflowing brine is
cleaned immediately and the risk of
corrosion inside the dishwasher is
prevented. If you are not going to
wash immediately, run the dish-
washer empty and without deter-
gent in the shortest cycle.
Depending on the different salt
particle sizes of different brands on
the market and the water hardness,
it may take several hours for the
salt to dissolve in the water. For
this reason, the "Salt Shortage
Warning Indicator" will remain on
for a certain period of time after the
salt is filled into the dishwasher.
6.5 Detergent
You can use powder, liquid / gel and tablet
detergent in the dishwasher.
Use only detergents intended for
use in dishwashers. We recom-
mend that you do not use deter-
gents containing chlorine and phos-
phates as these are harmful to the
environment.
Filling the detergent
For good washing and drying results, ob-
serve the instructions on the detergent
packaging. Contact the detergent manufac-
turer for further questions.
Do not put solvents in the detergent
compartment. There is a risk of ex-
plosion!
Put the detergent in the detergent compart-
ment as follows immediately before start-
ing the dishwasher.
1. Open the detergent compartment door
by pushing the latch to the right (A).(de-
pends on the model)
2. Put the specified amount of powder, li-
quid/gel or tablet detergent into the
compartment.
Bekijk gratis de handleiding van BEKO BDFS16030W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFS16030W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6224 MB |
