BEKO BDFN36540PA handleiding
Handleiding
Je bekijkt pagina 39 van 52
EN / 39
7.5 Starting the Cycle
Close your dishwasher’s door to start your
dishwasher after selecting the cycle and
additional functions
Dishwasher softens the water as
per the hardness of the mains wa-
ter. The washing cycle period may
also change while the program is
being executed as a result of the
room temperature, mains water
temperature and the amount of
dishes.
Care to avoid opening of the door
while the dishwasher is being oper-
ated. Be careful as steam may
come out when you open the door
of the dishwasher.
After rinsing, the dishwasher will be
quiet for a while in pause mode
then will proceed to the drying step
to drain all the water left on the
dishes and inside the dishwasher
and to clean the water softener.
7.6 Cancelling/Resetting the Pro-
gram
Press the Start / Hold / Cancel the Program
button for 3 seconds while the door is
closed.
After the 3 - 2 - 1 countdown, the display
will show 0:01, wait until the draining pro-
cess is completed.
Discarding process will be completed
within 2 minutes and your dishwasher will
beep when it is done.
Some models are not equipped
with a buzzer.
Detergent or rinse aid may remain
inside the dishwasher and/or the
dishes being washed as per the
step of the program you have can-
celled.
7.7 Low Salt Warning Indicator
Check the low salt indicator on the screen
of your dishwasher to see if you have
softening salt in your dishwasher. Add salt
to the salt reservoir when the low salt indic-
ator on the display comes on.
The Water Softening System sec-
tion describes how to set the water
hardness level.
7.8 Low Rinse Aid Warning Indic-
ator
Check the low rinse aid indicator on the
screen of your dishwasher to see in you
have enough rinse aid in your dishwasher.
Add rinse aid to the rinse aid reservoir
when the low salt indicator on the display
comes on.
7.9 Setting the Rinse Aid Amount
1. With the door closed, first press the On/
Off button to turn on the dishwasher, then
press the On/Off button and P2 buttons to-
gether for 3 seconds to activate the menu.
2. Navigate to the “P” position on the dis-
play by pressing the P2 button.
Bekijk gratis de handleiding van BEKO BDFN36540PA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN36540PA |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5959 MB |
