BEKO BDFN26460PA handleiding
Handleiding
Je bekijkt pagina 42 van 52
EN / 42
9 Troubleshooting
9.1 Error Codes, Causes and Solutions
Error Code Cause Solution
E01 Warning
P1 Blinks
Power led flashes
Chassis water filling fault
1-Error algorithm is activated.
2-Cycle ends.
If you see the error continuously,
1-Cut off the electricity.
2-Close the valve.
3-Get in touch with the authorized
service.
E02 Warning
P2 Blinks
The Water outage icon illuminates.
The Washing led illuminates.
Water outage error Check the water supply.
Filter is blocked
1-Cut off the electricity connection.
2-Cut off the water connection.
3-Remove water inlet hose.
4-Check and clean the filter.
5-Establish the water connection.
6-Establish the electricity connection.
Other
If the error continues,
1-Close your dishwasher.
2-Get in touch with the authorized
service.
E06 Warning
P2 flashes
P6 flashes
Temperature sensor in the dish-
washer is faulty
If you see this error continuously and
washing performance has reduced,
1-Close your dishwasher.
2-Get in touch with the authorized
service.
E07 Warning
P2 flashes
F1 and F2 flashes
Flowmeter is faulty
1-Error algorithm is activated.
2-Cycle ends.
If you see the error continuously,
1-Cut off the electricity.
2-Close the valve.
3-Get in touch with the authorized
service.
The error codes can change de-
pend the model.
9.2 Troubleshooting
Machine does not work.
• The mains plug may not be plugged in.
>>> Check that the mains plug is plugged
in.
• The fuse may have blown. >>> Check the
fuses in your house.
• Water may not be coming out. >>> Make
sure that the water inlet tap is open.
Bekijk gratis de handleiding van BEKO BDFN26460PA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN26460PA |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6479 MB |
