BEKO BDFN26460PA handleiding
Handleiding
Je bekijkt pagina 39 van 52
EN / 39
7.8 Low Salt Warning indicator
Check the low salt indicator on the screen
of your dishwasher to see if you have
softening salt in your dishwasher. Add salt
to the salt reservoir when the low salt indic-
ator on the display comes on.
The Water Softening System sec-
tion describes how to set the water
hardness level.
7.9 Low Rinse Aid Warning indic-
ator
Check the low rinse aid indicator on the
screen of your dishwasher to see in you
have enough rinse aid in your dishwasher.
Add rinse aid to the rinse aid reservoir
when the low salt indicator on the display
comes on.
Setting the Rinse Aid Amount
1. After switching on your dishwasher
with the On/Off button, enter the Set-
tings menu by pressing the Settings
button for 3 seconds depending on the
model or by pressing the On/Off and
P2 Program buttons simultaneously for
3 seconds.
2. Move to “P” position on the screen by
pressing the P2 key.
3. Set to a proper level by selecting one of
the “P:0”,“P:1”,“P:2”,“P:3” or “P:4” posi-
tions with the P3 program key.
4. To save, exit the settings menu by
pressing on/off button of your dish-
washer for 3 seconds. Your settings
will be saved automatically.
Applies no rinse aid in the P:0 position dur-
ing the washing cycle.
Applies 1 dose of rinse aid in the P:1 posi-
tion.
Applies 2 dose of rinse aid in the P:2 posi-
tion.
Applies 3 dose of rinse aid in the P:3 posi-
tion.
Applies 4 dose of rinse aid in the P:4 posi-
tion.
8 Maintenance and Cleaning
8.1 Maintenance and cleaning
Read “Safety Instructions” section
first!
Before cleaning the machine, un-
plug it and turn off the tap.
Do not use abrasive materials when
cleaning.
For the machine to work efficiently,
clean the filters and impellers at
least once a week.
If cleaned at regular intervals, the life of the
product will be extended and frequently en-
countered problems will be reduced.
Cleaning the exterior of the machine
Gently wipe the exterior of your machine
and the door seals with a delicate cleaning
agent and a damp cloth. Wipe the "control
panel" only with a slightly damp cloth.
Cleaning the inside of the machine
Clean the machine monthly by running it at
the highest possible temperature with de-
tergent or special machine cleaning agents.
This will help to remove residues and limes-
cale from the inside of the machine.
If there is water left in the machine, drain
the water in the machine by following the
procedures in the “Cancelling the program”
section. If the water cannot be drained, re-
move the filters as indicated in the “Clean-
ing the filters” section and check if there
are any dirt particles that have accumu-
lated at the bottom of the machine and
blocked the water path, and clean them if
necessary.
8.2 Cleaning the filters
(Depending on Model)
Bekijk gratis de handleiding van BEKO BDFN26460PA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN26460PA |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6479 MB |
