BEKO BDFN26442X handleiding
Handleiding
Je bekijkt pagina 17 van 48
EN / 17
Setting the water softening system
Washing efficiency will be improved when
the water softening system is set correctly.
Read the section on adjusting the water
softening system first.
Regeneration of the water softening sys-
tem can take place in all cycles during the
drying step. When regeneration is per-
formed, the duration of the cycle, energy
and water consumption are increased. For
the regeneration process, the table below
shows the frequency of the regeneration
process, maximum additional time, water
and energy consumption depending on the
water consumption for the Eco 50 °C cycle
when the dishwasher is operated under
standard conditions with a water supply of
14 dH.
Eco 50 °C
water consumption (l)
renew after .... cycle Additional time (min)
Additional water con-
sumption (l)
Additional energy
consumption (kWh)
12.3-14.7 5 5 3.0 0.05
9.6-12.2 6 5 3.0 0.05
9.0-9.5 7 5 3.0 0.05
8.0-9.0 8 5 3.0 0.05
7.0-7.9 9 5 3.0 0.05
For water consumption in the Eco 50 °C
cycle of your dishwasher, refer to the Cycle
Information and Average Consumption Val-
ues Table given in the Cycle Table.
6.3 Setting the Water Softening
System
Setting the water softening system cor-
rectly will improve your dishwasher’s wash-
ing, rinsing, and drying performance.
NOTICE!To set the system, first find out
your water hardness level from the au-
thorised service in your region and set it
as follows.
After determining the water hardness:
1. After switching on your dishwasher with
the On/Off button, enter the Settings menu
by pressing the Settings button for 3
seconds depending on the model or by
pressing the On/Off and P2 program but-
tons simultaneously for 3 seconds.
2. Navigate to the “r” position on the screen
by pressing the P2 key.
3. Set the correct level by selecting one of
the “r:1”,“r:2”,“r:3”,“r:4” or “r:5” positions
with the P3 program key.
4. To save, exit the settings menu by press-
ing on/off button of your dishwasher for 3
seconds. Your settings will be saved auto-
matically.
Hardness Level
English Hardness
°dE
German Hardness
°dH
French Hardness
°dF
Water Hardness Level Indicator
0. Level
0-5 0-4 0-8
Bring the water hardness setting
to position 1 by pressing the Se-
lect key. (r1)
1. Level
6-9 5-7 9-13
Bring the water hardness setting
to position 1 by pressing the Se-
lect key. (r1)
2. Level
10-15 8-12 14-22
Bring the water hardness setting
to position 2 by pressing the Se-
lect key. (r2)
Bekijk gratis de handleiding van BEKO BDFN26442X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN26442X |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6042 MB |
