BEKO BDFN26442W handleiding
Handleiding
Je bekijkt pagina 34 van 48
EN / 34
Cycle Selection/Cancel Cycle Button
Select the cycle that you want to run from
the "cycle selection keys" and press the
key.
Press the Start / Hold / Cancel key for 3
seconds to cancel the running program
After the 3 - 2 - 1 countdown, the display
will show 0:01 and the discarding process
begins. Discarding process will be com-
pleted within 2 minutes and your dish-
washer will beep when it is done.
Function Buttons
When the Function Buttons are pressed
during cycle selection or delay selection, if
the cycle you selected supports the func-
tion you have selected, a positive button
warning sound will be heard. When the in-
dicator for the selected function is lit, this
means the function has been selected.
To cancel function selection, press and
hold the function button again until the
function indicator turns off.
Preparing the dishwasher
1. Open the door of the dishwasher.
2. Load your dishes as described in the
user manual.
3. Ensure that lower and upper spray
arms are rotating freely.
4. Put a suitable amount of detergent in
the detergent reservoir.
Cycle selection
1. Turn your dishwasher on by pressing
the On / Off button.
2. Inspect low salt and low rinse aid indic-
ators and add salt and/or rinse aid if re-
quired.
3. Select the proper washing cycle for
your dishes considering the cycle in-
formation and average consumption
values table.
4. When you press the Start/Pause/Can-
cel button of your dishwasher, the se-
lected program starts.
7.2 Program information and aver-
age consumption values table
Bekijk gratis de handleiding van BEKO BDFN26442W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN26442W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6042 MB |
