BEKO BDFN26442W handleiding
Handleiding
Je bekijkt pagina 18 van 48
EN / 18
3. Level
16-19 13-15 23-27
Bring the water hardness setting
to position 3 by pressing the Se-
lect key. (r3)
4. Level
20-24 16-19 28-34
Bring the water hardness setting
to position 4 by pressing the Se-
lect key. (r4)
5. Level
25-62 20-50 35-90
Bring the water hardness setting
to position 5 by pressing the Se-
lect key. (r5)
Table1: Water Hardness Level Setting
Table
Using a flat head screwdriver, turn the re-
generation setting switch to the same posi-
tion as the hardness level you set on the
control panel. For example, if the setting on
the control panel is 3, turn the regeneration
setting switch to 3.
• If the hardness of the water you use is
above 50°dH (French hardness) or if you
use well water, you should use filters and
water purifiers.
• If the hardness of the water you use is
below 7°dH, you do not need to use salt
in your dishwasher. In this case, the "Low
Salt Indicator Light" on your dishwasher
control panel will be on continuously.
• If your water hardness setting is at level
1, the "Low Salt Indicator Light" will re-
main on continuously even though you
do not need to use salt. If you do add salt
in this position, the salt will not be con-
sumed and the lamp will not come on.
NOTICE!If you move house, you may
need to adjust the water hardness set-
ting of your dishwasher again according
to the water hardness of the place you
move to, taking into account the inform-
ation given above. If the water hardness
setting of your dishwasher has been ad-
justed before, the last water hardness
setting will be displayed on your dish-
washer’s display panel.
Mechanical Water Hardness Adjustment
The glass care function setting is used to
adjust the water hardness level of the pre-
softened wash water in the dishwasher.
The setting should be made according to
the water hardness setting level. The ad-
justment is made with a wide and flat
screwdriver. The screwdriver is used to turn
the Mechanical glass care setting switch.
Simply turn the Mechanical switch to the
same position as the water hardness set-
ting level.
For example
For water hardness level “r3”, set the Mech-
anical Glass Care setting switch to position
3
For water hardness level "r4", set the Mech-
anical Glass Care setting switch to position
4
6.4 Filling the salt
The water softening system must be re-
newed in order for the dishwasher to oper-
ate at the same performance at all times.
Dishwasher salt is used for this purpose.
Only use special softening salt for
use in dishwashers.
Bekijk gratis de handleiding van BEKO BDFN26442W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN26442W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6042 MB |
