BEKO BDFN15440W handleiding
Handleiding
Je bekijkt pagina 18 van 52
EN / 18
3. Level
16-19 13-15 23-27
Bring the water hardness setting
to position 3 by pressing the Se-
lect key. (P3)
4. Level
20-24 16-19 28-34
Bring the water hardness setting
to position 4 by pressing the Se-
lect key. (P4)
5. Level
25-62 20-50 35-90
Bring the water hardness setting
to position 5 by pressing the Se-
lect key. (P5)
Table1: Water Hardness Level Setting
Table
Using a flat head screwdriver, turn the re-
generation setting switch to the same posi-
tion as the hardness level you set on the
control panel. For example, if the setting on
the control panel is 3, turn the regeneration
setting switch to 3.
• If the hardness of the water you use is
above 50°dH (French hardness) or if you
use well water, you should use filters and
water purifiers.
• If the hardness of the water you use is
below 7°dH, you do not need to use salt
in your dishwasher. In this case, the "Low
Salt Indicator Light" on your dishwasher
control panel will be on continuously.
• If your water hardness setting is at level
1, the "Low Salt Indicator Light" will re-
main on continuously even though you
do not need to use salt. If you do add salt
in this position, the salt will not be con-
sumed and the lamp will not come on.
NOTICE!If you move house, you may
need to adjust the water hardness set-
ting of your dishwasher again according
to the water hardness of the place you
move to, taking into account the inform-
ation given above. If the water hardness
setting of your dishwasher has been ad-
justed before, the last water hardness
setting will be displayed on your dish-
washer’s display panel.
Mechanical Water Hardness Adjustment
The glassware care setting is used to alter
the hardness of the pre-softened wash wa-
ter in the dishwasher. Make the adjustment
according to the water hardness setting.
Make the adjustment using a wide, flat
screwdriver. Use the screwdriver to turn the
mechanical glassware care adjustment
switch. Simply turn the mechanical switch
to the same position as the water hardness
setting.
For example,
Set the Mechanical Glassware Care adjust-
ment switch to position 3 for water hard-
ness setting "r3"
Set the Mechanical Glassware Care adjust-
ment switch to position 4 for water hard-
ness setting "r4"
6.4 Filling the salt
The water softening system must be re-
newed in order for the dishwasher to oper-
ate at the same performance at all times.
Dishwasher salt is used for this purpose.
Only use special softening salt for
use in dishwashers.
Bekijk gratis de handleiding van BEKO BDFN15440W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN15440W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6028 MB |
