BEKO BDFN15440G handleiding
Handleiding
Je bekijkt pagina 37 van 52
EN / 37
Ideal for enhanced dishwashing hygiene.
This function increases washing and rins-
ing temperatures, extends program dura-
tion, and adds an extra rinse cycle for su-
perior sanitation.
If the Automatic Door Open feature is act-
ive,Hygiene Intense function cannot be se-
lected.
7.4 Programming the Washing Time
Delaying
If economy billing schedule is applied for
power in your region, you may use the delay
function to wash your dishes at the relevant
times.
You may delay the start time of the cycle
you have selected up to 24 hours.
1.Press the delay key after selecting the
washing programme and any other addi-
tional functions.
2.When you press the delay key, “0:30” is
displayed on the Screen Info Line and Delay
indicator starts to flash.
3.Set the desired period by pressing the
delay key. Each time you press the button,
the time increases in 30 minute increments
up to 6 hours and then in 1 hour increments
up to 24 hours.
4.Close the door of your dishwasher after
the delay. Cycle shall start automatically
when the delay period is over.
Changing the settings while the delay
function is active
You cannot make changes to the washing
cycle, additional functions, or to the delay
period while the delay function is active.
It is not possible to set/change the
cycle and auxiliary functions after
the start of the cycle.
To cancel the delay function
Open the dishwasher door and press Select
Cycle / Cancel Cycle button for three
seconds. After the 3 - 2 - 1 countdown, the
display will show 0:01, close the door of the
dishwasher and wait until the draining pro-
cess is completed. Discarding process will
be completed within 2 minutes and your
dishwasher will beep when it is done.
The delay function cannot be set
after the cycle has started.
7.5 Starting the Cycle
Press the Start / Hold / Cancel key to start
your dishwasher after selecting the cycle
and additional functions.
Dishwasher softens the water as
per the hardness of the mains wa-
ter. The washing period may differ
due to the water softening process.
Moreover, program period may also
change while the program is being
executed as a result of the room
temperature, mains water temper-
ature and the amount of dishes.
Care to avoid opening of the door
while the dishwasher is being oper-
ated. If you need to open the door,
stop the dishwasher by pressing
the Start / Hold / Cancel key. Then
open the door of the dishwasher.
Be careful as steam may come out
when you open the dishwasher’s
door. Press the Start / Hold / Can-
cel key again after closing the dish-
washer door. Cycle shall be re-
sumed.
After rinsing, the dishwasher will be
quiet for a while in pause mode
then will proceed to the drying step
to drain all the water left on the
dishes and inside the dishwasher
and to clean the water softener.
a
7.6 Cancelling the Cycle
1.Press the Start / Hold / Cancel key for 3
seconds to cancel the cycle.
2.Release the key when the Program indic-
ator starts flashing. The dishwasher will ex-
ecute the necessary operations for a few
minutes to cancel the program.
Bekijk gratis de handleiding van BEKO BDFN15440G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN15440G |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6028 MB |
