BEKO BDFN15330B handleiding
Handleiding
Je bekijkt pagina 22 van 52
EN / 22
• Set the water hardness setting to the
highest position and run a wash cycle
with the dishwasher empty.
• After the empty wash cycle, read the in-
struction manual and adjust the water
hardness setting again according to your
mains water.
• Set the appropriate rinse aid setting.
6.6 Rinse aid
The rinse aid used in dishwashers is a spe-
cial compound to improve drying efficiency
and to prevent traces of water or limescale
from remaining on the washed items. For
this reason, make sure that there is rinse
aid in the rinse aid compartment and use
only rinse aid that is intended for use in
dishwashers.
Filling the rinse aid
1. Open the rinse aid cap with the latch.
2. Fill the compartment to the MAX level.
3. Close the compartment lid by pressing
it lightly against point (B).
4. Increase the setting if water marks ap-
pear on the crockery after washing, or
decrease it if a blue mark remains
when wiped by hand. This setting is set
to position 3 at the factory.
The rinse aid setting is described
under the heading "Adjusting the
rinse aid quantity" in the operation
of dishwasher section.
Bekijk gratis de handleiding van BEKO BDFN15330B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN15330B |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6011 MB |
