BEKO B5W5941BDW handleiding
Handleiding
Je bekijkt pagina 13 van 56
EN / 13
NOTICE
Keep the transportation safety
bolts in a safe place to reuse when
the product needs to be moved
again in the future.
Install the transportation safety
bolts in reverse order of the disas-
sembly procedure.
Never move the product without the
transportation safety bolts properly
fixed in place.
4.5 Connecting to Water Supply
NOTICE
Models with a single water inlet
should not be connected to the hot
water tap. Laundry may be dam-
aged or the product may go into
protection mode and not work.
Do not use old or used water inlet
hoses on your new product. This
may cause water leakage in your
product and stains on your laundry.
1. Tighten all hose nuts by hand. Make
sure to tighten all hose connections
completely. Never use a tool when tight-
ening nuts.
2. After completing hose connection, open
the taps all the way and check if there is
any water leakage from the connection
points. In case of a leakage, turn off the
tap and unscrew the nut. Check the seal
and tighten the nut carefully again. To
prevent possible water leaks and dam-
ages that may occur, keep the taps
closed when the product is not in use.
4.6 Connecting the Drain Hose to the
Drain
1. Attach the end of the drain hose directly
to waste water drain, washbasin or
bathtub.
Your house will be flooded if the
water draining hose is dislocated
during water draining. There is also
a risk of burning due to the high
washing temperatures. In order to
prevent such situations and make
sure that the product performs wa-
ter intake and drain processes
without any problem, fix the drain
hose securely.
2. Connect the drain hose to a minimum
height of 40 cm and a maximum height
of 100 cm.
3. Installing the water draining hose at
ground level or close to the floor (40 cm
below) and then raising it makes water
discharge difficult and the laundry may
come out extremely wet. Thus, follow
the heights provided in the figure.
4. To prevent the waste water to go back
into the product again and to ensure
easy drainage, do not immerse the end
of the hose into the waste water or do
not insert it into the drain for more than
15 cm. If it is too long, cut it short.
5. The end of the hose should not be bent,
it should not be stepped on and the
hose must not be pinched between the
drain and the product. Otherwise, water
discharge issues may emerge.
6. If the length of the hose is too short, use
it by adding an original extension hose.
The overall length of the hose shall not
be longer than 3.2 m. To prevent water
Bekijk gratis de handleiding van BEKO B5W5941BDW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | B5W5941BDW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4503 MB |
