BEKO B5W51041BDW handleiding
Handleiding
Je bekijkt pagina 13 van 24
EN / 13
• The water inlet hose may be kinked. >>>
Straighten the hose.
• The water inlet filter may be clogged. >>>
Clean the filter.
• The loading door may not be closed. >>>
Close the door.
The product does not drain water.
• The water drain hose may be clogged or
kinked. >>> Clean or straighten the hose.
• The pump filter may be clogged. >>>
Clean the pump filter.
The product vibrates or makes noise.
• The product may be standing unstable.
>>> Balance the product by adjusting its
feet.
• A hard object may have gotten stuck in
the pump filter. >>> Clean the pump filter.
• Transportation safety bolts may not have
been removed. >>> Remove the trans-
portation safety bolts.
• The amount of laundry in the product
may be less. >>> Load more laundry into
the product.
• Excessive laundry may have been loaded
into the product. >>> Remove some of
the laundry inside the product or
straighten the laundry with your hand and
distribute it evenly inside the product.
• The product may be resting on a hard
surface. >>> Check that the product is
not resting on anything.
Water is coming from the bottom of the
product.
• The water drain hose may be clogged or
kinked. >>> Clean or straighten the hose.
• The pump filter may be clogged. >>>
Clean the pump filter.
No water is visible in the product during
washing.
• Water is in the invisible part of the
product. >>> This is not a malfunction.
The loading door does not open.
• The door lock is activated due to the wa-
ter level in the product. >>> Drain the wa-
ter by running the Pump or Spin program.
• The product may be heating the water or
in the spinning phase. >>> Wait for the
program to finish.
• The front cover may remain attached due
to pressure on it. >>> The front cover is
released from its attached position and
opened by pushing and pulling the
handle.
• In cases where there is no electricity, the
loading door of the product will not open.
>>> To open the loading door of the
product, open the pump filter cover and
pull down the loading door emergency re-
lease lever located behind it. See.Loading
Door Lock
The program time does not count down. (*)
• The laundry may have created an imbal-
ance in the product. >>> Due to the unbal-
anced distribution of the laundry inside
the product, the automatic unbalanced
load detection system may have been ac-
tivated.
The product does not pass the squeezing
step. (*)
• The laundry may have created an imbal-
ance in the product. >>> Due to the unbal-
anced distribution of the laundry inside
the product, the automatic unbalanced
load detection system may have been ac-
tivated.
• The spin cycle may not have been com-
pleted because the water inside the
product could not be drained. >>> Check
the filter and drain hose.
• Excessive foam may have formed due to
excessive detergent use and the auto-
matic foam dampening system may have
been activated. >>> Use the recommen-
ded amount of detergent.
Suds are overflowing from the detergent
drawer.
• Too much detergent may have been
used. >>> Mix 1 tablespoon of softener
with ½ liter of water and pour it into the
main wash compartment of the detergent
drawer. >>> Add the appropriate amount
of detergent to the product according to
the program and maximum load stated in
Bekijk gratis de handleiding van BEKO B5W51041BDW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | B5W51041BDW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 1469 MB |
