BEKO B3WBT691415W handleiding

40 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 35 van 40
EN / 35
When the water drain is finished, close
the end with the plug again and fix the
hose in its place.
Unscrew the pump filter.
Clean any residues inside the filter as
well as fibres, if any, around the pump im-
peller region.
Replace the filter.
8 Troubleshooting
Please read the “Safety Instruc-
tions” section first!
Programmes do not start after the loading
door is closed.
Start / Pause / Cancel button is not
pressed. >>> Press Start / Pause / Cancel
button.
It may be difficult to close the loading
door in case of excessive loading. >>>
Reduce the amount of laundry and make
sure that the loading door is closed prop-
erly.
Programme cannot be started or selected.
The product has switched to self-protec-
tion mode due to a supply problem (line
voltage, water pressure, etc.). >>> De-
pending on the product model, select an-
other program by turning the Program Se-
lection button or pressing and holding
the On/Off button for 3 seconds to can-
cel the program. Previous programme
will be cancelled. See Cancelling the Pro-
gramme [}32]
Water inside the product.
Some water has remained in the product
due to the quality control processes in
the production. >>> This is not a failure;
water is not harmful to the product.
The product does not take water in.
Tap is turned off. >>> Turn on the taps.
Water inlet hose is bent. >>> Flatten the
hose.
Water inlet filter is clogged. >>> Clean the
filter.
Loading door is not closed. >>> Close the
door.
The product does not drain water.
Water drain hose is clogged or twisted.
>>> Clean or flatten the hose.
Pump filter is clogged. >>> Clean the
pump filter.
Product vibrates or makes noise.
Product is standing unbalanced. >>> Ad-
just the stands to balance the product.
A hard substance has entered into the
pump filter. >>> Clean the pump filter.
Transportation safety bolts are not re-
moved. >>> Remove the transportation
safety bolts.
Laundry quantity in the product is too
little. >>> Add more laundry to the
product.
Excessive laundry is loaded in the
product. >>> Take out some of the laun-
dry from the product or distribute the
load by hand to balance it homogen-
eously in the product.
Product is leaning on a rigid item. >>>
Make sure that the product is not leaning
on anything.
There is water leaking from the bottom of
the product.
Water drain hose is clogged or twisted.
>>> Clean or flatten the hose.
Pump filter is clogged. >>> Clean the
pump filter.
Product stopped shortly after the pro-
gramme started.
Machine has stopped temporarily due to
low voltage. >>> Product will resume run-
ning when the voltage restores to the nor-
mal level.
Product directly drains the water it takes
in.
Draining hose is not at adequate height.
>>> Connect the water draining hose as
described in the user manual.

Bekijk gratis de handleiding van BEKO B3WBT691415W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBEKO
ModelB3WBT691415W
CategorieWasmachine
TaalNederlands
Grootte3487 MB