BEKO B3WBT691415W handleiding
Handleiding
Je bekijkt pagina 15 van 40

EN / 15
Adjustment of the Feet:
• When you turn the rotary knob shown in-
side the circle in the direction of the ar-
row, the machine will raise 0.3 mm up. If
you turn it in the opposite direction of the
arrow, the machine will lower by 0.3 mm.
• You can use the water meter to check the
rear and front feet of the machine for the
proper setting.
• Do not adjust the rear feet using re-
chargeable devices. Use a screwdriver in-
stead.
Adjusting the Feet with the Water Level In-
dicator:
• To adjust the Water Level Indicator, you
must remove the Detergent Drawer.
• The bubble inside the Water Level Indic-
ator must be in the middle for the system
to work correctly.
• If the bubble inside the Water Level Indic-
ator is on the left, the right preset foot of
the Washing Machine must be adjusted.
• If the bubble inside the Water Level Indic-
ator is on the right, the left preset foot of
the Washing Machine must be adjusted.
• If the bubble inside the Water Level Indic-
ator is on the rear, the front preset foot of
the Washing Machine should be turned
left (clockwise).
• If the bubble inside the Water Level Indic-
ator is on the front, the front preset foot
of the Washing Machine should be
turned right (counterclockwise).
4.7 Electrical Connection
Connect the product to a grounded outlet
protected by a 16 A fuse. Our company
shall not be responsible for the damages
that shall be incurred due to using the
product without grounding according to
local regulations.
• Connection must comply with national
regulations.
• The electrical connection cable infra-
structure of the product must be ad-
equate and suitable for product require-
ments. It is recommended to use a resid-
ual current device.
• Power cable plug must be within easy
reach after installation.
• If the current supply to the fuse or
breaker in the house is less than 16
Amps, have a qualified electrician install
a 16 amp supply.
• The voltage specified in the "Technical
specifications" section must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs. Overheating and
burning may occur due to the connecting
cable.
Damaged power cables should be
replaced by the authorised service
in order to prevent possible danger.
4.8 Start Up
Before starting to use the product make
sure that the preparations described in sec-
tion “Environmental instructions” and “In-
stallation”. To prepare the product for
washing laundry, perform first operation in
Drum Cleaning programme. If this pro-
gramme is not available in your product, ap-
Bekijk gratis de handleiding van BEKO B3WBT691415W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | BEKO |
Model | B3WBT691415W |
Categorie | Wasmachine |
Taal | Nederlands |
Grootte | 3487 MB |