BeefEater Signature BS28310 handleiding

Handleiding

123456789101112/ 12

Afdrukken

Je bekijkt pagina 7 van 12

7ELECTRIC CONTROL

ELECTRIC CONTROL

To manually activate ‘Defrost’ cycle

• Press the

button and hold it. a ‘beep’ will sound as

soon as pressed.

• Hold button pressed for 10 – 20 seconds, until a second

‘beep’ can be heard.

• The indicator light will now illuminate under the ‘defrost’

symbol and the fridge is into ‘defrost’ cycle.

• ‘Defrost’ will run for 20mins, and then automatically

revert to normal operation.

To manually change back to normal operating mode from

the ‘defrost’ mode

• Press the

button again, a ‘beep’ will sound.

• Hold button pressed for 10 – 20 seconds, until a second

‘beep’ is heard.

• Both indicator lights under the ‘defrost’ symbol and

under the ‘cooling’ symbol will now flash

while the fridge is gearing up to switch back to normal

operation.

• After 5 – 20 minutes, only the indicator light

will

illuminate under the ‘cooling’ symbol to confirm the

fridge is back in its normal cooling mode.

TIPS & INFORMATION

IMPORTANT

• The fridge will go through a normal periodical

defrosting cycle, and a manual defrosting operation is

only require in most extreme cases. It is better to avoid

if not necessary.

• While in the ‘defrost’ mode, the fridge cooling power

is reduced working. The automatic cycles ensure the

defrosting is done in the most efficient manner, a when

required. It is not recommended to leave the fridge in

the manually set defrost mode for prolonged periods of

time.

NOTE: The controller allows you to choose a desired

operating temperature of between -2°C and 8°C.

BeefEater do not recommend to operate the fridge on

settings of below 4°C, as such setting will cause content of

the fridge to freeze, and will result in unnecessary strain on

the cooling systems, and undue high energy consumption.

It is advisable to keep the cover over the controller closed

when not being accessed, so no unintended operation or

damage will occur.

In normal operation the controller turns the compressor off

at the set temperature and back on after the temperature

had risen a few degrees. As such, the reading in the

controller is always a couple of degrees above set-point

and that is perfectly okay.

When the temperature was reached and the compressor is

in its ‘off’ cycle, no indicator light will illuminate.

123456789101112/ 12

Bekijk gratis de handleiding van BeefEater Signature BS28310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Koelkast