Beaba Steril 'n' Dry handleiding
Handleiding
Je bekijkt pagina 7 van 40
7
IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE
min 120 ml
min 120 ml
blinks
38 8 30
INSTRUCTIONS FOR USE
Before rst use
• Complete a sterilization cycle with 50 ml of white vinegar mixed with 150 ml of water, in the heating
unit, without bottles or any accessories.
• Empty the remaining water into the heating unit.
• Run a sterilization cycle with 200 ml of water, in the heating unit, to rinse.
• Drain remaining water.
Usage
• Before each sterilization cycle, clean all the bottles and accessories with a bottle brush and soapy
water and then rinse.
To start a cycle:
• Pour 120 ml minimum of water into the water tank
It is preferable not to exceed the MAX limit indicated on the water tank.
CAUTION: do not pour water into the air outlet.
• Connect the appliance to a suitable power socket.
• Arrange bottles and accessories as shown :
• Select the desired cycle mode:
a. 2 in 1 mode
(sterilization + drying) – 38 min
b. Sterilization mode
8 min
c. Drying mode
30 min
• Press
to start.
• The cycle can be paused during drying, if required, by pressing .
Bekijk gratis de handleiding van Beaba Steril 'n' Dry, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Beaba |
| Model | Steril 'n' Dry |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6515 MB |
