Be You BY-WLHC handleiding
Handleiding
Je bekijkt pagina 9 van 44
7
EN
Charging
•
To charge the unit, make sure the unit is switched Off. Connect the USB Type-C connector
to the charging socket on the bottom of the unit.
• Connect the USB cable to a suitable power socket.
• The Charge indicator light turns on when the battery is charging.
•
When the battery is fully charged the Power display reads 100. Charging time is
approximately 3 hours.
• Once fully charged, unplug the USB cable from the power socket and remove the cable
from the clipper.
NOTES:
• The product body may be a little hot when unit is in use or charging. This is
normal and it will not affect the unit’s performance.
• The Charging indicator flashes when the power is lower than 15%.
• When the battery is fully drained, the unit will not turn on immediately when
it is plugged to the power socket. Please wait between 1-2 minutes to turn
the unit on again.
•
If the product is not being use for long periods of time, please ensure the
battery is charged at least once every 3 months to keep it in optimal condition.
Warning!
• Do not charge the product if the room temperature is higher than 40 °C or
lower than 0 °C.
•
Do not charge the unit for more than 6 hours each time. This will reduce
the battery life.
Inserting/replacing the comb attachments
• To attach the combs, hold the comb with the teeth up. Insert it into the hair clipper’s side
groves. Push down until you hear a “click”.
Product usage
B
Bekijk gratis de handleiding van Be You BY-WLHC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Be You |
| Model | BY-WLHC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2973 MB |
