Be Cool BCSN40CMZ handleiding
Handleiding
Je bekijkt pagina 24 van 30
24
4. Place the rear grille on the motor (the handle must point upwards) and tighten
the grille fixing screw clockwise.
5. Remove the black sleeve on the motor spindle. Place the fan blade on the
motor spindle and tighten it with the wing screw (anticlockwise).
6. Loosen the screw on the protective ring. Attach the protective ring to the front
grille. Place the front grille over the rear grille with the logo horizontally and
adjust the protective ring on the rear and front grille so that it is properly
seated between the locking tabs of the protective ring.
7. Ensure that both the rear and front grille edges are inserted into all moulded
locking tabs, then tighten the screw on the guard ring.
8. Attach the fog tube properly to the fog outlet on the front grille.
Please note: The fog tube must be correctly attached to the fog outlet to avoid
leaks.
Fill water tank
Please avoid moving the fan when it is filled with water.
The maximum capacity of the water tank is 2.6 litres.
Pour the water into the storage tank by pulling the tanks upwards and unscrewing
the tank lid as shown in (Fig. B).
Front grille
Fan blade
Behind the grid
Protection
ring
Wing
screw
Bekijk gratis de handleiding van Be Cool BCSN40CMZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Be Cool |
| Model | BCSN40CMZ |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 2890 MB |
