Bauknecht WM BK 8A2JGS handleiding
Handleiding
Je bekijkt pagina 8 van 8
TROUBLESHOOTING
Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service, make sure that the problem cannot be easily
solved using the following list.
Anomalies Possible causes / Solution
The washing machine does
not start.
The appliance is not plugged into the socket fully, or not enough to make contact.
There is no power in the house.
The wash cycle does not start.
The washing machine door is not closed properly.
The ON/OFF button has not been pressed.
The START/PAUSE button has not been pressed.
The water tap has not been opened.
A delay has been set for the start time.
The washing machine does
not ll with water (“H2O”
appears on the display).
The water inlet hose is not connected to the tap.
The hose is bent.
The water tap has not been opened.
There is no water supply in the house.
The pressure is too low.
The START/PAUSE button has not been pressed.
The washing machine
continuously loads and
unloads water.
The drain hose is not tted between 65 and 100 cm from the oor.
The free end of the hose is immersed in water.
The wall drainage system is not tted with a breather pipe.
If the problem persists even after these checks, turn o the water tap, switch the appliance o and contact the
Technical Assistance Service. If the home is on one of the upper oors of a building, there may be problems relating
to back-siphonage, causing the washing machine to ll with water and drain continuously. Special anti-siphon
valves are available in shops and help to prevent this inconvenience.
The washing machine does
not drain or spin.
The cycle does not include drainage: with certain cycles it must be started manually.
The drain hose is bent.
The drainage duct is clogged.
The washing machine
vibrates a lot during the spin
cycle.
The drum was not unlocked correctly during installation.
The washing machine is not level.
The washing machine is tucked between furniture cabinets and the wall.
The washing machine leaks.
The water inlet hose is not screwed on properly.
The detergent dispenser drawer is obstructed.
The drain hose is not properly attached.
The “Options” and START/
PAUSE indicator lights
ash rapidly and the display
visualises an error code (e.g.:
F-01, F-...).
Switch o the machine and unplug it, wait for approximately 1 minute and then switch it back on again.
If the problem persists, contact the Technical Assistance Service.
There is too much foam.
The detergent is not suitable for machine washing (it should display the text “for washing machines” or “hand and
machine wash”, or the like).
Too much detergent was used.
After pressing START/PAUSE
button, the drum turns
but the washing machine
does not ll water and no
error on display.
See “DEMO MODE”
DEMO MODE: to deactivate this function, switch the washing machine OFF. Than press and hold “START/PAUSE” button, within 5 seconds press also
“ON/OFF” button and hold both buttons for 2 seconds.
400020025431
xxxxxxxxxxxx
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using the QR code in your appliance
• Visiting the website http://docs.bauknecht.eu and parts-selfservice.bauknecht.com
• Alternatively, contact our Technical Assistance Service (the telephone number is indicated in the warranty booklet). When contacting the
Technical Assistance Service, provide the codes shown on the adhesive label applied to the inside of the door.
For User’s Repair & Maintenance Information visit www.bauknecht.eu.
You can nd more information about your model online at https://eprel.ec.europa.eu/ which is the ocial EU EPREL product database. After
selecting the Product Category, enter the Model Identier of the product. The Model Identier is made up of letters and numbers and can be
found on the identication plate, as Mod. (see image on the right).
Bekijk gratis de handleiding van Bauknecht WM BK 8A2JGS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bauknecht |
| Model | WM BK 8A2JGS |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 1684 MB |
