Handleiding
Je bekijkt pagina 13 van 32
CONTROL PANEL
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, touch the control until the cooking zone displays light up.
To switch o, touch the same control until the displays switch o. All the
cooking zones are deactivated.
If within 10 seconds of switching on, no function is selected, the hob switches
o automatically.
SWITCHING ON AND ADJUSTING COOKING ZONES
Place the pot on the desired cooking zone and switch on the cooking top. Activate
the selected cooking zone by touching the corresponding “Zone selection control“.
“5“ will appear on the display. Slide the finger over the “Power setting control“ to
select the required power level, from min. 0 to max. 9. To confirm the selection wait
10 seconds or touch again the same “Zone selection control“.
DEACTIVATION OF COOKING ZONES
To switch off the cooking zone, select the level “0“ with the “Power setting control“.
Power indicator display
Selected cooking zone indication
(the dot blinks when there is a Timer active on that zone
)
The cooking zone switches o and, if still hot, the letter “H“ appears on the
zone display.
CONTROL PANEL LOCK
This function locks the controls to prevent accidental activation of the hob.
To activate the control panel lock, touch
control; an acoustic signal sounds
and a luminous indicator appears on the display. The control panel is locked
except for the switching o function.
To deactivate the control panel lock, repeat the activation procedure.
The presence of water, liquid spilled from pots or any objects resting on the
controls can accidentally activate or deactivate the control panel lock.
TIMER
The timer can be used to set the cooking time for a maximum of 99 minutes (1
hour and 39 minutes) for all the cooking zones.
Select the cooking zone to be used, touch the timer “–“ or “+“ controls and a beep
signals the function. The display shows “00“. The Timer value can be decreased
and increased by keeping the finger on the controls “+“ or “–“. After the Timer value
selection, the display continue to blink for 10 seconds before the countdown starts.
FIRST TIME USE
After connecting the hob to the electrical power supply, the control panel
is locked. To unlock the control panel, touch the
control for 2 seconds.
The control panel lock indicator switches o and the hob can be used. Read
the “Control panel lock“ paragraph for more details.
Timer controls
and display
Zone selection controls and display
On/Off
Melting
Boiling
Control
panel lock
Dual/Triple zone
Power setting control
PRODUCT DESCRIPTION
120/165/
210 mm
180 mm
145 mm
145 mm
THANK YOU FOR BUYING A BAUKNECHT PRODUCT
In order to receive a more complete assistance, please
register your product on www.register10.eu.
PLEASE SCAN THE QR CODE ON
YOUR APPLIANCE IN ORDER TO
REACH MORE INFORMATION
!
Before using the appliance carefully read the Safety
Instruction.
EN
Owner's manual
Bekijk gratis de handleiding van Bauknecht ESIS 8641 NE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bauknecht |
| Model | ESIS 8641 NE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4637 MB |
