Bauknecht BKO FBM handleiding

20 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 4 van 20
EN
Daily Reference Guide
4
1. CHECK WATER CONNECTION
Check that the dishwasher is connected to the water supply and that
the tap is open.
2. SWITCH ON THE DISHWASHER
Press the ON/OFF button.
3. LOAD THE RACKS (see LOADING THE RACKS).
4. FILL THE DETERGENT DISPENSER
5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE
Select the most appropriate program in accordance with the type of
crockery and its soiling level (see PROGRAMS DESCRIPTION) by pressing
the PREVIOUS/NEXT buttons.
Select the desired options (see OPTIONS AND FUNCTIONS). Not all options
are compatible with all programs.
6. START
Start the wash cycle by closing the door and pressing START/Pause but-
ton (led is lit). When the program starts you hear a single beep.
7. END OF WASH CYCLE
The end of the wash cycle is indicated by sound and the display
shows END. Switch o the appliance by pressing the ON/OFF button
and opening the door.
Wait for a few minutes before removing the crockery - to avoid burns.
Unload the racks, beginning with the lower one.
The machine will switch o automatically during certain extended pe-
riods of inactivity, in order to minimise electricity consumption.
If the crockery is only lightly soiled or if it has been rinsed with water
before being placed in the dishwasher, reduce the amount of deter-
gent used accordingly.
MODIFYING A RUNNING PROGRAM
If a wrong program was selected, it is possible to change it, provided that it
has only just begun. RESET the machine: press and hold the ON/OFF but
-
ton for more than 3. sec., and the machine will switch o. The dashboard
will show “0:01”. Wait until drain cycle ends (around 1 minute). Switch the
machine back on using the ON/OFF button and select the new wash cycle
and any desired options. Start the cycle by pressing the START/Pause button.
ADDING EXTRA CROCKERY
Without switching o the machine, open the door rst slightly to avoid
water splashing out (START/Pause led starts blinking) (Caution!: Hot
steam!) and place the crockery inside the dishwasher. Close the door and
press the START/Pause button, the cycle will resume from the point at
which it was interrupted.
ACCIDENTAL INTERRUPTIONS
If the door is opened during the wash cycle, or if there is a power cut, the
cycle stops. Close the door and ONLY IF YOU PRESS the START/Pause but-
ton the cycle will resume from the point at which it was interrupted.
TIPS
Before loading the baskets, remove all food residues from the crockery and
empty the glasses. You do not need to rinse beforehand under running
water. Arrange the crockery so that it is held in place rmly and does not
tip over; and arrange the containers with the openings facing downwards
and the concave/convex parts placed obliquely, thus allowing the water to
reach every surface and ow freely.
Warning: lids, handles, trays and frying pans should not prevent the spray-
er arms from rotating.
Place any small items in the cutlery basket.
Very soiled dishes and pans should be placed in the lower basket because
in this sector the water sprays are stronger and allow a higher washing per-
formance. After loading the appliance, make sure that the sprayer arms can
rotate freely.
UNSUITABLE CROCKERY
Wooden crockery and cutlery.
Delicately decorated glasses, artistic handicrafts and antique crockery.
Their decorations are not resistant.
Parts in synthetic material which do not withstand high temperatures.
Copper and tin crockery.
Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces can change
and fade during the washing process. Some types of glass (e.g. crystal ob-
jects) can become opaque after a number of wash cycles too.
DAMAGE TO GLASS AND CROCKERY
Only use glasses and porcelain guaranteed by the manufacturer as dish-
washer safe.
Use a delicate detergent suitable for crockery
Collect glasses and cutlery from the dishwasher as soon as the wash cy-
cle is over.
TIPS ON ENERGY SAVING
When the household dishwasher is used according to the manufacturers
instructions, washing tableware in a dishwasher usually consumes
less energy and water than hand dishwashing.
In order to maximize dishwasher eciency, it is recommended to in-
itiate the wash cycle once the dishwasher is fully loaded. Loading
the household dishwasher up to the capacity indicated by the manu-
facturer will contribute to energy and water savings. Information on
the correct loading of tableware can be found in the Loading chapter.
In case of partial loading, it is recommended to use a dedicated wash
options if available (Half load/ Zone Wash/ Multizone), lling up only
selected racks. Incorrect loading or overloading of the dishwasher may
increase resources usage (such as water, energy and time, as well as in-
crease noise level), reducing cleaning and drying performance.
Manual pre-rinsing of tableware items leads to increased water and ener-
gy consumption and is not recommended.
HYGIENE
To avoid odour and sediment which can be accumulated in the dishwasher
please run a high-temperature program at least once a month. Use a
teaspoon of detergent and run it without loading to clean your appliance.
RESISTANCE TO FROST
If the appliance is placed in surroundings exposed to the risk of frost, it
must be drained completely. Turn o the water tap, remove the inlet and
outlet hoses, and let all the water drain away. Make sure that the water
softener is full of dissolved regeneration salt in the salt container, to
protect the appliance from temperatures of up to -20°C.
If the appliance was stored in frost conditions the appliance must remain at
an ambient temperature of min. 5°C for at least 24 hours before the rst run.
DAILY USE
ADVICE AND TIPS

Bekijk gratis de handleiding van Bauknecht BKO FBM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBauknecht
ModelBKO FBM
CategorieVaatwasser
TaalNederlands
Grootte4063 MB