Handleiding
Je bekijkt pagina 23 van 28
Installation and operation
700473 21 / 26
EN
5. Plug the appliance into a suitable single socket.
6. Before first use and before putting any beverage bottles in, the appliance should
reach the set temperature.
It takes approximately 2–3 hours.
7. Set the temperature in the bottle cooler.
Temperature Control in Bottle Cooler 700473 (Fig. 1)
The appliance temperature is set by rotating the temperature controller (1).
The temperature may be set in the range of 0–7:
0 — compressor is disconnected
ATTENTION!
The appliance is still connected to the power supply.
1 — the highest temperature (the weakest cooling)
7 — the lowest temperature (the strongest cooling)
NOTE!
If products in the cooler are too cold, set the temperature controller to
levels 1, 2 or 3. If products are chilled to an insufficient degree, use the
temperature setting of 4, 5 or 6.
Temperature Control in Bottle Cooler 700323 (Fig. 2)
After switching the appliance on, the green power indicator light is lit.
The temperature is set by rotating the temperature controller (2) in the inner
chamber of the appliance. With solid cooler door, the set level may be read in the
temperature level display (3).
The temperature may be set in the range of 0–5:
0 — compressor is disconnected.
ATTENTION!
The appliance is still connected to the power supply.
1 — the highest temperature (the weakest cooling)
5 — the lowest temperature (the strongest cooling)
Bekijk gratis de handleiding van Bartscher 700473, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bartscher |
| Model | 700473 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2822 MB |
