Bartscher 191001 handleiding
Handleiding
Je bekijkt pagina 17 van 26
Installation and operation
191001 15 / 24
EN
Water Heating
ATTENTION!
Make sure the temperature control is fully turned counterclockwise and in
position .
1. Now fill the water tank with the required amount of fresh water (only up to the
max. fill mark).
WARNING! Risk of scalding!
Overfilling may lead to hot water leaks and scalding!
Observe the maximum filling volume!
HINT!
To reduce heating time and save energy, the tank may be filled with hot
water. When using cold water, the water heating phase takes longer.
2. Place the lid on the water tank.
3. Place the teapot on the lid.
4. Now, plug the appliance into a suitable single socket.
5. Rotate the temperature regulator clockwise to the selected temperature setting.
The following water temperature setting options are available: Boiling / interval
boiling (BOIL) / hot (HOT) / warm (WARM). Follow the instructions in the section
'Temperature Control'.
During heating up the operation indicator light is on.
Water Boiling
1. To boil water, turn the temperature control clockwise all the way to the position
.
The operation indicator will light up. Indicates that the device is heating.
After a few minutes the water boils. This can be seen in the emerging steam.
ATTENTION!
Leaving the temperature regulator in this position will cause the water to
boil continuously and will evaporate completely over time.
Bekijk gratis de handleiding van Bartscher 191001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bartscher |
| Model | 191001 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2021 MB |
Caratteristiche Prodotto
| Soort bediening | Draaiknop |
| Kleur van het product | Zilver |
| Gewicht | 1700 g |
| Breedte | 305 mm |
| Diepte | 210 mm |
