Barco F80 Rigging Frame handleiding
Handleiding
Je bekijkt pagina 13 van 20
R5906906-02 Rigging frame F80 series
13
How to suspend from a truss, using the rigging clamps
1. Measure the distance between the two used support bars of the truss, using the center tube as reference.
Image 1-12: Example of truss
2. Turn the projector upside down and install the rigging clamps, according the measured distance and secure
this position. Ensure that the rigging points are symmetrically lined up, so that the projector will hang in
balance.
X mm
Image 1-13: Clamp position
Warning: Always use four (4) rigging points, equally spread, to suspend the projector.
3. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the
truss are nearby the rigging clamps mounted on the projector.
F80 series multifunctional frame
Bekijk gratis de handleiding van Barco F80 Rigging Frame, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Barco |
| Model | F80 Rigging Frame |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2781 MB |
