Baofeng UV-9G handleiding
Handleiding
Je bekijkt pagina 41 van 46
38
23
BCL – Busy Channel
Lock-out
MENU+23
OFF ON
*Disables the [PTT] button on a channel that is
already in use. The transceiver will sound a
beep tone and will not transmit if the [PTT]
button is pressed when a channel is already in
use.
24
AUTOLK –Automatic
Keypad Lock
MENU+24
OFF ON
*When ON, the keypad will be locked if not
used in 8 seconds. Pressing the [# ] key for 2
seconds will unlock the keypad.
25
SFT-D – Frequency
Offset Direction
MENU+25
OFF: TX = RX (simplex)
+: TX will be shifted higher in frequency than RX
- : TX will be shifted lower in frequency than RX
26
OFFSET -Frequency shift
amount
MENU+26
00.000…69.990
*Specifies the difference between the TX and
RX frequencies
27
MEM-CH - Store a
Memory Channel
MENU+27
000…127
*This menu is used to either create new or
modify existing channels (0 through 127) so
that they can be accessed from
MR/Channel Mode
28
DEL-CH - Delete a
memory channel
MENU+28
000…127
*This menu is used to delete the programmed
information from the specified channel (0
through 127) so that it can either be
programmed again or be left empty.
Bekijk gratis de handleiding van Baofeng UV-9G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-9G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5650 MB |
