Baofeng UV-9G handleiding
Handleiding
Je bekijkt pagina 30 van 46
27
(19) SCAN Resume Mode (SC-REV) - MENU No.18
Thanks to this function, UV-9G can SCAN in frequency or channel mode. You can choose amongst three options:
• TO: Time-operated SCAN
Whenever a signal is detected, the radio will suspend the SCAN for 5 seconds, and then will continue to SCAN even if the
signal is still present.
• CO: Carrier-operated SCAN
Whenever a signal is detected, the radio will stop scanning. It will resume to SCAN once the signal will disappear.
• SE: Search SCAN
The radio will stop scanning once a signal is detected.
(20) PTT-ID (PTT-ID) - MENU No.19
With this function you can decide when sending the ANI-ID code in tx mode.
You can choose amongst 4 possibilities.
• OFF: press PTT to turn it off
• BOT: the code is sent when you press the PTT
• EOT: the code is sent when the PTT is released
• BOTH: the code is sent when you press and release the PTT
Note: select ‘OFF’ when using in case of affecting the radio.
(21) PTT ID delay (PTT-LT) - MENU No.20
In this MENU you can set the delay time (0-30ms) sending the PTT-ID.
Note: select ‘0’ in normal using.
(22) Channel A Display Mode (MDF-A) - MENU No.21
This function is used to set the display mode of channel A.
Display modes:
• FREQ.: Frequency + channel No. • CH: Channel number
• NAME: Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(23) Channel B Display Mode (MDF-B) - MENU No.22
Bekijk gratis de handleiding van Baofeng UV-9G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-9G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5650 MB |
