Baofeng UV-82X3 handleiding
Handleiding
Je bekijkt pagina 80 van 103
Visit Radioddity.com for Downloads and Help 73
AL-MOD - Alarm
32
Mode
SITE [0]: Sounds alarm through
your radio speaker only
TONE [1]: Transmits a cycling
tone over-the-air
CODE [2]: Transmits '119' (911 in
reverse?) followed by the ANI
SITE: Sounds alarm through your radio
speaker only
TONE: Transmits a cycling tone over-the-
air
CODE: Transmits '119' (911 in reverse?)
followed by the ANI code over-the-air
code over-the-air
33
BAND - Band
Selection
TDR-AB - Transmit
VHF [0] | UHF [1]
In VFO/Frequency mode, sets [A] or [B] to
the VHF or UHF band.
When enabled, priority is returned to
34
selection while in
Dual Watch mode
35
STE - Squelch Tail
Elimination
OFF [0] | A [1] | B [2]
OFF [0] | ON [1]
selected display once the signal in the
other display disappears.
This function is used eliminate squelch tail
noise between BaoFeng handhelds that
are communicating directly (no repeater).
Reception of a 55 Hz or 134.4 Hzmutes the
audio long enough to prevent hearing any
squelch tail noise.
36
RP-STE - Squelch
Tail Elimination
This function is used eliminate squelch tail
OFF [0] | 1 - 10 noise when communicating through a
repeater.
Bekijk gratis de handleiding van Baofeng UV-82X3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-82X3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16051 MB |
