Baofeng UV-82X3 handleiding
Handleiding
Je bekijkt pagina 64 van 103
Visit Radioddity.com for Downloads and Help 57
conveniently enough also how the BaoFeng UV-82X3 natively handles repeater setup in VFO, by
specifying offset rather than transmit frequency.
This might cause confusion because many expect this to be true globally when it isn't.
SFT-D and OFFSET only function in VFO mode.
MR mode uses and stores the RX frequency and the T X frequency only. SFT-D and OFFSET
don't have to be set or they can even be set completely wrong and a working r
epeater
channel can be created.
It is convenien
t to use SFT-D and OFFSET with 'reverse' mode to determine the TX
frequency to be stored in a channel, but they are otherwise unused for MR mode.
The following instructions assume that you know what transmit and receive frequencies your
repeater employs, and that you're authorized to use it.
Procedure 11.1. Repeater setup
1. Turn the radio OFF, then Press and Hold the button while powering ON to switch to
Frequency (VFO) mode
2. Enter the repeater’s output (your receiving) frequency by either using the and
Bekijk gratis de handleiding van Baofeng UV-82X3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-82X3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16051 MB |
