Baofeng UV-7B handleiding
Handleiding
Je bekijkt pagina 34 van 37
20 DTMF-ST
OFF
No DTMF Side Tones are heard
DT-ST
Side Tones are heard only from manually keyed DTMF codes
ANI-ST
Side Tones are heard only from automacally keyed DTMF codes
DT+ANI
All DTMF Side Tones are heard
21 PTT-ID
OFF
No ID is sent.
BOT
The selected S-CODE is sent at the beginning
EOT
The selected S-CODE is sent at the ending
BOTH
The selected S-CODE is sent at the beginning and ending
22
PTT-DLY
100-3000ms
Signal code sending delay. PTT-ID Delay (milliseconds)
23 ALERT
1000Hz
The following conguraons will transmit accordingly:
PTT + = Transmits 1000Hz Tone Burst
1450Hz
PTT + = Transmits 1450Hz Tone Burst
1750Hz
PTT + = Transmits 1750Hz Tone Burst
2100Hz
PTT + = Transmits 2100Hz Tone Burst
24 TAIL
OFF
Disable Squelch Tail Eliminaon.
ON
Enable Squelch tail eliminaon. to prevent any squelch tails from being heard.
25 Press SK2
FM Radio
FM radio on/o
Scan
Scan on/o
Search
Search on/o
VOX
VOX on/o
26 Reset
VFO MODE
Reset the radio's VFO menu to factory defaults (no reset for bank, scan sengs)
RESET ALL
Resets the radio to factory defaults, with some excepons.
5
Program
Channel
1 CH.NAME Channel 1
View channel name, allows to rename the current channel. Press the key to
switch the input method, allowing the input of leers, numbers and symbols.
2 RX Frequency
View the current channel Receiver frequency.
3 TX Frequency
View the current channel Transmier frequency.
4 Trans Power
High
Selects between HIGH transmier power when in VFO/Frequency mode.
Low
Selects between LOW transmier power when in VFO/Frequency mode.
5
Bandwidth
Wide
Wideband (25 kHz bandwidth)
Bekijk gratis de handleiding van Baofeng UV-7B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-7B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3919 MB |
