Baofeng UV-5RM PLUS GPS handleiding
Handleiding
Je bekijkt pagina 44 van 49
7 RX DCS
Mutes the speaker of the transceiver in the
absence of a specific low-level digital signal. If the
station you are listening to does not transmit this
specific signal, you
•OFF
•017N-754N
will not hear anything.
8 TX CTCSS
•OFF
•67-254
Transmits a specific and continuous subaudible
signal to unlock the squelch of a distant receiver
(usually a repeater).
9 TX DCS
•OFF
•023N-754I
Transmits a specific low-level digital signal to
unlock the squelch of a distant receiver (usually a
repeater).
10 Signaling
•DTMF: Set a DTMF ID as the default call ID for the
current channel.
•2Tone: Set a 2Tone as the default call ID for the
current channel.
•5Tone: Set a 5Tone as the default call ID for the
current channel.
•MDC: Set a MDC as the default call ID for the current
channel
Edit the DTMF/ 2Tone/ 5Tone/ BDC1200 in the
PC programing software before it can be selected.
Press the PTT key to transmit the selected DTMF
ID/2Tone/ 5Tone/ BDC1200.
11 SP-Mute
•OFF: You can hear the call once the channel receive
matched carrier.
•QT: You can hear the call when receive matched
CTCSS/DCS signal.
•Optional Signal: You can hear the call when receives
a matched signaling.
•QT+DTMF: You can hear the call when receives a
matched CTCSS/DCS and matched signaling.
When the channel is set up for both CTCSS/DCS
decoding and optional signaling, you can set up
the RX condition in this menu.
12 Scan Add
•OFF: Disable scanning of the current channel
•ON: Add current channel to scan group
Add the current channel to allow it to be scanned
13 Scan Priority
•OFF: No channel is set as Priority Channel .
•ON: Sets the current channel as the scanning priority
channel.
This option allows users to select a channel in the
scan list as Priority Channel. If only Priority
Channel is set, 50% of a radio's scans are on
Priority Channel during scanning.
14 TX Admit
•Always: The user can transmit all the time.
•Channel Free: The radio allows transmission only
when the current channel is free.
•CTDS Correct: The radio can transmit when the
current channel is free or CTCSS/CDCSS is matched.
This option defines the response from the
transmitter upon PTT press on the current
channel, in order to prevent the user transmitting
on channels that are already in use.
Bekijk gratis de handleiding van Baofeng UV-5RM PLUS GPS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-5RM PLUS GPS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6082 MB |
