Baofeng UV-5RM PLUS GPS handleiding
Handleiding
Je bekijkt pagina 31 van 49
Add up to 10 zones, add a full 10 zone will automatically hide the “Add Zone” option.
7.3.2 Power On Displya Setting
• Picture: The radio will display a preset picture when powered on. Picture requires .bmp format, size size 160*128 pixels
• Message: Through CPS programming software, General Setup>>General Setup>>Power On Character.
Or through self-station setup, press the
key >> Radio Setting >> Power On Message.
• Voltage:The power voltage is momentarily displayed.
7.3.3 Display Reversal
For ease of use in different work scenarios, the radio's display interface can be oriented STAN and FAIL model.
Press
key >> Radio Settings >> DIR
-STAN: Normal display mode, suitable for desk or handheld scenarios.
-FAIL: the display interface is reversed, applicable to shoulder or waist-mounted scenarios.
7.3.4 MDF-A/ MDF-B Channel Mode A Display
[A][B] MR/Channel Mode Display Format.
Freq: Displays programmed Frequency
Name: Displays the channel name.
CH: Displays the channel number.
7.3.6 Alarm Model
You can select the type of indication when an alarm is activated from the following options.
Press the key >> Intercom Settings >> Alarm Type.
-On Site: the alarm tone is given locally and the control center and group members will not receive the alarm signal.
-Code+Sound: After sending an alarm code to the control center and group members, it will automatically activate the hot microphone and
send a background tone. The receiver will hear the background sound of the alarm. There are no other audible or visual indications.
Bekijk gratis de handleiding van Baofeng UV-5RM PLUS GPS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-5RM PLUS GPS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6082 MB |
