Baofeng UV-5RM PLUS GPS handleiding
Handleiding
Je bekijkt pagina 27 van 49
Frequency Mode (VFO): Used for a temporary frequency assignment, such as a test frequency or quick field programming if permitted.
Channel Mode (MR): Used for selecting preprogrammed channels.
Ex 1. Programming a Channel Repeater Offset with CTCSS Tone
EXAMPLE New memory in Channel 28:
RX = 432.55000 MHz
TX = 437.55000 MHz (This is a (+ 5) Offset)
TX CTCSS tone 123.0
(1) Press the
key to switch between menus.
(2) Press [VFO/MR] key to set the radio to VFO mode, and the VFO icon is displayed on the lift.
(3)
[3] [7] 123.0 Selects desired TX encode tone (Ex 123 CTCSS)
(4)
[3] [1][3] [0][5] Enter the OFFSET frequency (Ex. 5.00MHz)
(5)
[3] [1][4] [2] Select the offset direction (Ex. positive offset
）
(6) Enter RX frequency (Ex. 43255000) Enter RX frequency (Ex. 43255000)
(7)
[3] [1][7] [2][8] Enter the same channel (Ex 10)
-->>
channel has been added
(8) Press [VFO/MR] key to return to the MR mode and the channel number will reappear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 28:
RX = 432.6500 MHz
TX CTCSS tone 123.0
(1) Press the
key to switch between menus.
(2) Press [VFO/MR] key to set the radio to VFO mode, and the VFO icon is displayed on the lift.
(3)
[3] [7] 123.0 Selects desired TX encode tone (Ex 123 CTCSS)
(4) Enter RX frequency (Ex. 43265000) Enter RX frequency (Ex. 43265000)
(5)
[3] [1][7] [2][8] Enter the same channel (Ex 10)
-->>
channel has been added
(6) Press and hold the
key to return to the MR mode and the channel number will reappear.
Bekijk gratis de handleiding van Baofeng UV-5RM PLUS GPS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-5RM PLUS GPS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6082 MB |
