Baofeng UV-5G PRO handleiding
Handleiding
Je bekijkt pagina 23 van 38
When the signal disappears the radio will automatically switch again to FM radio mode.
6.9 Flashlight
This function is very useful for night illumination.
To turn it on press MON; push it again, the flash light will be strobe; push it again: it will turn off.
6.10 1000Hz, 1450Hz, 1750Hz Tone-burst
To send out a tone-burst; you simultaneously will press a key while holding down the PTT. No further configuration required
using this feature.
The following configurations will transmit accordingly:
• [PTT] + [CALL] = Transmits 1000Hz Tone Burst
• [PTT] + [VFO/MR] = Transmits 1450Hz Tone Burst
• [PTT] + [A/B] = Transmits 1750Hz Tone Burst
If you have the keypad lock enabled on your radio, you can still send a 1750Hz tone the regular way without having to unlock
your radio.
6.11 DTMF
DTMF is an in-band signaling method using dual sinusoidal signals for any given code. Originally developed for telephony
systems, it has proved a very versatile tool in many other areas.
In two-way radio systems, DTMF is most commonly used for automation systems and remote control. A common example
would be in amateur radio repeaters where some repeaters are activated by sending out a DTMF sequence (usually a simple
single-digit sequence).
-20-
Bekijk gratis de handleiding van Baofeng UV-5G PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-5G PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3986 MB |
