Baofeng UV-5G Plus handleiding

43 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 39 van 43
39
31
DELCH - Delete a
memory channel
001 - 999
This menu is used to delete the programmed
information from the specified channel (001
through 999) so that it can either be
programmed again or be left empty.
32
AL-MOD
- Alarm Mode
SITE [0]: Sounds alarm through your radio
speaker only
TONE[1]: Transmits a cycling tone
over-the-air
CODE [2]: Transmits '119' (911 in reverse)
followed by the ANI code over-the-air
SITE: Sounds alarm through your radio speaker
only
TONE: Transmits a cycling tone over-the air
CODE: Transmits '119' (911 in reverse?)
followed by the ANI code over-the-air
33
STE
- Squelch Tail
Elimination
OFF [0] | ON [1]
This function is used eliminate squelch tail noise
between BaoFeng handhelds that are
communicating directly (no repeater).
Reception of a 55 Hz or 134.4 Hz tone burst
mutes the audio long enough to prevent hearing
any squelch tail noise.
34
RP-STE - Squelch Tail
Elimination
OFF [0] | 1 - 10
This function is used eliminate squelch tail noise
when communicating through a repeater.
35
RPT-RL
- Delay the squelch tail
of repeater
OFF [0] | 1 - 10
Delay the Tail Tone of Repeater (X100
milliseconds)
36 ROGER - Roger Beep OFF [0] | ON [1]
Sends an end-of-transmission tone to indicate to
other stations that the transmission has ended.
37 TONE-Tone-burst 1000[0]|1450[1]|1750[2]|2100[3]
To send out a tone-burst; you simultaneously will
press a key while holding down the PTT. No
further configuration required using this feature.
38 MENU EXIT TIME
5 [0] 10[1] - 60[10] in 5 second steps
(TIMEOUT-5)/5=[n]
The time setting for menu exit without menu
operation.
39 VOX DELAY
0.5 [0] 0.6[1] -2.0[15] in 0.1 second steps
(TIMEOUT-0.1)/0.1=[n]
There’s a brief delay between when you finish
talking and the radio returns to tx mode; this
delay can be adjusted.
40
POWER ON MSG
- Power On Message
LOGO[0]|VOLTAGE[1]
Welcome message displayed immediately after
startup.
The LOGO is programmed by the manager.

Bekijk gratis de handleiding van Baofeng UV-5G Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBaofeng
ModelUV-5G Plus
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4902 MB