Baofeng UV-25 Plus handleiding
Handleiding
Je bekijkt pagina 39 van 44
VOX
VOX on/off
26
Reset
VFO
Reset the radio's VFO menu to factory defaults (no reset for bank, scan
settings)
ALL
Resets the radio to factory defaults, with some exceptions.
4
GNSS
1
GPS On/Off
OFF
Turn off the position system, long press the MENU key is ineffective
ON
Turn on the position system, press and hold the MENU key to enter GPS
mode
2
Time Zone
-12 to 0 to + 12
Set the time zone of the region
3
GPS Mode
GPS
BDS
GPS+BDS
5
Program
Channel
1
CH.NAME
Channel 1
View channel name, allows to rename the current channel. Press the
key to switch the input method, allowing the input of letters, numbers and
symbols.
2
RX Frequency
View the current channel Receiver frequency, allow to change the current
frequency. Input the RX frequency by keypad, click the Menu key to save
3
TX Frequency
View the current channel Transmitter frequency, allow to change the
current frequency. Input the TX frequency by keypad, click the Menu key to
save
4
Trans Power
High
Selects between HIGH transmitter power when in VFO/Frequency mode.
Mid
Selects between Middle transmitter power when in VFO/Frequency mode.
Low
Selects between LOW transmitter power when in VFO/Frequency mode.
5
Bandwidth
Wide
Wideband (25 kHz bandwidth)
Narrow
narrowband (12.5 kHz bandwidth)
6
RX CTCSS
OFF;67-254.1
Mutes the speaker of the transceiver in the absence of a specific and
continuous sub-audible signal. If the station you are listening to does not
transmit this specific and continuous signal, you will not hear anything.
Bekijk gratis de handleiding van Baofeng UV-25 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-25 Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3896 MB |
