Baofeng GT-5R Pro handleiding
Handleiding
Je bekijkt pagina 18 van 39
a. Use the [VFO/MR] key to switch to Frequency (VFO) mode.
b. Press [A/B] until the icon appears next to the upper display.
c. Enter [4][3][2][6][1][2][5] on the numeric keypad.
WARNING!
Just because you can program in a channel does not mean you're automatically authorized to use that
frequency. You may be tempted to use PMR446, FRS, GMRS and MURS (in USA) frequencies. Do note however
that there are restrictions on these bands that make this transceiver illegal for use. Contact your local
regulatory body for further information on what laws, rules and regulations apply to your area.
5.6 Channel (MR) mode
The use of Channel (MR) mode is dependent on actually having programmed in some channels to use.
Once you have channels programmed and ready, you can use the ▲ and ▼ keys to navigate between channels.
Note: If you have channels programmed with Transmit power set to Low, you can use the [# ] key to
momentarily switch over to mid or high power if you're having trouble getting through.
Chapter6. Advanced Features
6.1 Frequency scanning
This function can scan the frequency.
a. In frequency mode, press [*/scan] key for more than 2 seconds. The radio will start scanning the frequency according to
the set frequency step.
b. You can change the scanning direction with the ▲ and ▼ keys.
c. Press any key to stop the scanning.
Note: for Scan mode, see Menu No.18.
6.2 Channel scanning
This function can scan the channels.
a. In channels mode, press [*scan] key for more than 2 seconds. The radio will start scanning according to the channel you
-15-
Bekijk gratis de handleiding van Baofeng GT-5R Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | GT-5R Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4311 MB |
