Baofeng DM-32UV handleiding
Handleiding
Je bekijkt pagina 43 van 59
Set to adjust the transmit signal using MSK modulation technique when transmit BDC1200 to avoid hearing signaling noise.
-OFF: Turns off the digital signal squelch function. When transmit, the unit does not emit signaling noise.
-On: Enables the digital signal squelch function. When transmit, it is accompanied by signaling noise.
7.6.6 Two Tones (2 Tone)
(1) Pre Time
Used to set the time interval between press the PTT button and sending the first tone. This interval is used to ensure that the receiver is
allowed to stabilize before receiving the first tone. The value range is: 0 to 5000 milliseconds, and the step value is: 100 milliseconds. The
default value is: 500 milliseconds.
(2) 1st Tone Duration
Used to set the duration of the first audio sent by the current 2-Tone system. The value range is: 500~4000 milliseconds, and the step value is:
100 milliseconds. The default value is: 1000 milliseconds.
(3) 2nd Tone Duration
Used to set the duration of the second audio sent by the current 2-Tone system. The value range is: 500~4000 milliseconds, and the step value
is: 100 milliseconds. The default value is: 3000 milliseconds.
(4) Long Tone Duration
Used to set the duration of the long tone sent by the current 2-tone system. The value range is: 5.0~10.0 seconds, and the step value is: 0.1
seconds. The default value is: 5.0 seconds.
(5) Gap Time
Used to set the interval time between the first audio and the second audio sent by the current 2-Tone system. The value range is: 0~2000
milliseconds, and the step value is: 100 milliseconds. The default value is: 1000 milliseconds.
(6) Side Tone
Used to turn on the side tone of the current 2-tone system, i.e., the beep when firing.
-Off: When transmit, the unit will not emit the sound of the code.
-On: When transmit, it is accompanied by the sound of the key and the identity code ANI-ID.
(7) Auto Reset Time
It is used to set the waiting time for automatic reset of the current 2-tone system. The value range is: 1~255 seconds, the step value is: 1
second. The default value is: 10 seconds.
7.6.7 Five Tones (5 Tone)
(1) Pre Time
42
Bekijk gratis de handleiding van Baofeng DM-32UV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | DM-32UV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7451 MB |
