Baofeng DM-32UV handleiding
Handleiding
Je bekijkt pagina 40 van 59
-Narrow: 12.5KHz
-Wide: 25.0KHz
*7.6.2.6. Optional Signal
Selects the type of signal used for the channel. Allowed are Dual Tone Multi-Frequency (DTMF), 2TONE, 5TONE, BDC1200.
-Off: No signal is configured for the current channel.
- DTMF: Dual Tone Multi-Frequency signal (DTMF signaling) is selected for the current channel.
Set the DTMF ID as the default call ID for the current channel. Press the PTT key to send the selected DTMF ID. Edit the DTMF ID in the menu or
using the PC program software.
-2 Tone: Selects two-tone signal (2 Tone) for the current channel.
-5 Tone: Selects five-tone signal (5 Tone) for the current channel.
-BDC1200: Selects BDC1200 signal for the current channel.
Sets BDC1200 as the default call ID for the current channel. Press [PTT] to send the selected BDC1200.
*7.6.2.7. PTT ID
Used to determine how the PTT ID is sent under the DTMF, five-tone, and BDC1200 signal systems, i.e., whether or not the PTT ID code is sent
when the PTT key is pressed or released.
-Disable: no PTT ID is sent. The default is disable.
-Upline code: send out the local ID only when the PTT key is pressed.
-Downline code: Issues the local ID only when the PTT key is released.
-Upline Code and Downline Code: the local ID is issued when the PTT key is pressed and released.
Upline Code: When “Upline Code” or “Both” is selected as the PTT ID type, it is used to set the content of the Upline Code. The input contents
are: 0~9, * and #, maximum 8 digits.
Downline Code: When “Downline Code” or “Both” is selected as the PTT ID type, it is used to set the content of the downline code. The input
contents are: 0~9, * and #, and the maximum input is 8 digits.
The upper line code and lower line code must be programmed by the CPS software.
*7.6.2.8. RX Squelch Mode
When the analog channel is set up for both CTCSS/DCS decoding and optional signaling, you can set up the RX condition in this menu.
-Carrier: You can hear the call once the channel receive matched carrier.
*7.6.2.9. SFT-D
- Off: Tx frequency is equal to Rx frequency.
39
Bekijk gratis de handleiding van Baofeng DM-32UV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | DM-32UV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7451 MB |
