Baofeng DM-1701 handleiding
Handleiding
Je bekijkt pagina 17 van 48
Alarm initiator to exit the alarm mode, there are two cases:
●Turn off the radio to exit the whole machine alarm.
● in other ways, when exiting alarm mode, the alarm on the current channel can only be temporarily exited.
When reselecting the channel, the alarm will continue;
The alarm function is enabled for you by the dealer (program path: "Edit -> Digital Emergency Alarm System ->
Emergency Alarm System -> System1"). Before using this function, you need to understand the following
concepts.
★Alarm Type
The radio prompts in different modes for different alarm types, as shown in the following table.
Alarm type Description
Disable Turn off alarm function (alarm disabled), but it can receive alerts from other radios.
Conventional When alarms, the radio gives an audible and visual prompt.
Silent When alarms, the radio will not give any audible or visual prompt. At the same time, no
sound is made on any received audio.
Silence with
voice
When
alarms, the radio will not give any audible or visual prompt. However, the radio
sounds when you press and hold the PTT button to initiate a call or respond to a call.
★Alarm Mode
Except the alarm type “Disable”, other alarm types support the following alarm modes. You can ask the dealer to
select one of them (Note: The following methods use “Conventional” alarm type as an example).
Alarm mode Description
Emergency
alarm
In this mode, you can press and hold the [Emergency mode on] button to send an alarm tone
to your partners or control center but can’t talk to the other party.
Emergency
alarm and call
(alarm call)
In this mode, you can press and hold the [Emergency mode on] button to send an alarm tone
to your partners or control center, and then press and hold the [PTT] button to speak to the
microphone, and your voice and surrounding background sound will be sent to the receiver.
Emergency
alarm and
voice
(emergency
call)
In this mode, you can press and hold the [Emergency mode on] button to enter the alarm
transmission channel. The product automatically activates the “emergency microphone”
(without holding down the PTT button). You can speak to the microphone, and your voice and
the surrounding background sound will be sent to receiver.
★Receive emergency alert
1. The number of alerts received when an emergency alert was received, along with the alert that was received,
alternating with the sender's alias or ID.
2. A beep sounds and the LED flashes red.
3. If enabled, your transceiver will automatically acknowledge the emergency alert. When the walkie talkie
receives an emergency alert, the screen displays a prompt that an emergency alert has been received, until an
acknowledgment is sent and the emergency mode exits. You will not be able to receive any other prompts or
show any other calls until you exit the screen for receiving an emergency alert.
12
Bekijk gratis de handleiding van Baofeng DM-1701, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | DM-1701 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9432 MB |
