Baofeng DM-1701 handleiding
Handleiding
Je bekijkt pagina 14 van 48
until the call is answered. Press 【BACK】 to enter the main screen and view the caller's alias before reply.
★Receive and reply single call
A single call is an individual walkie-talkie call to another individual walkie-talkie. There are two types of single
call types: the first type, the walkie talkie presence test is performed before the call is ready, and the other type is
ready for the call immediately.
When receiving a single call:
1. LED indicator light is green.
2. The top line of the screen shows the status icons such as RSSI. In the display area below the top line, the first
line shows a single call with the user's alias or ID in the middle and the one-way icon at the bottom (digital mode
only).
3. Hold the walkie talkie in a vertical position and keep it 1 to 2 inches (2.5 to 5.0 cm) from the mouth. If the
"Channel Idle Tone" feature is enabled, when the transceiver intercepts the PTT key, you will hear a short beep
indicating that the channel is free for you to answer.
4. Press 【PTT】 key to reply the call, LED indicator light is red.
5. Release the [PTT] key to answer.
6. If there is no voice activity for the scheduled time period, the call is terminated.
7. You will hear a short tone, the screen shows the call ended.
★Receive all call
All call is an individual walkie-talkie call to all walkie-talkies on the channel. It is used to publish important
notices that require special attention from users.
When receiving all call:
1. LED indicator light is green.
2. The top line of the screen shows the status icons such as RSSI. In the display area below the top line: The first
line shows the All call, the middle shows the user's alias or ID, the bottom shows the all call icon (digital mode
only)
3. After the termination of all calls, the walkie-talkie will return to the screen before receiving the call. If "channel
idle tone" is enabled, you will hear a short tone when the walkie talkie releases the [PTT] key, indicating that the
channel is ready for use and you cannot reply to all calls.
When you receive an all call, if you switch to another channel, the transceiver stops receiving the full call.
During a full call, you will not be able to use any of the preprogrammed keys until the call is ended.
★Start a walkie-talkie call
You can choose a channel, user ID or talk group in the following ways:
Channel knob
• Pre-programmed one-touch call button
• Address book list
• Manual Dialing (Via Contacts) - This method is suitable for single calling only and dialing using the keypad
★Use the channel knob to place a call
•Initiate group call
To initiate a call to a user group, the transceiver must be configured to belong to the talk group.
1. Rotate the channel knob to select the channel using the active talk group alias or ID.
9
Bekijk gratis de handleiding van Baofeng DM-1701, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | DM-1701 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9432 MB |
