Baby Trend Smart Steps Dine N' Play 3-in-1 handleiding

Niet gecategoriseerd

Baby Trend

14 pagina's

PDF beschikbaar

Handleiding

MONTAJE

INFORMATION

PLACING CHILD IN THE WALKER

WARNING: To reduce chance of child

slipping out of the seat, check that both feet

of the child touch the oor. Never carry walker

with the child in it, as the child may get hurt or

slip out.

• Always check the walker prior to each use to ensure that the

seat is snapped in place and that the walker has no loose

or broken parts. Do Not use the walker if it is damaged or

broken or missing parts.

• Before placing your child in the walker, please determine

that your child is developmentally ready for this type of

product. Generally, your child must be able to sit upright

unassisted and have adequate neck strength to exhibit very

good control of his or her head. Typically, a child should be

at least 6 months of age to use this product. Infants develop

at different rates and you should discuss the use of a walker

with your pediatrician to ensure that your infant is ready.

• Adjust the seat height of the walker to the lowest setting.

Place your child in the walker and check that both feet

touch the oor. The child should have only part of their

weight on their feet when their legs are straight. Adjust the

walker height as needed as your child grows. Do not adjust

height with child in the walker. Discontinue using the walker

if your child attempts to climb out, reaches 30 pounds in

weight or 32 inches in height, or when your child is able to

walk unassisted.

• The baby walker can be used for 3 different heights.

To adjust height, remove baby from walker. Adjustment

instructions can be referenced in step 1. Adjust to desired

height.

• When the position has been selected, check that the

safety button turned through 90 degrees to prevent the

accidental release of the mechanism. Always follow this

procedure. Never use the baby walker if the button is not in

the sideways position. Important: Never change the height

when the baby is in the walker.

“parte inferior”

Fig. 1a

Fig. 1b

Fig. 1c

• Para abrir el andador,

y levante la bandeja

y ubique la palanca

debajo de la bandeja

(Fig. 1a).

• Para ajustar la

altura: Tuerza la

palanca, deslícela

verticalmente y

empújela hacia

arriba para ajustarla

(Fig. 1b).

• Verique que la

palanca esté trabada

en su lugar después

de ajustar la altura

(Fig. 1c).

NOTA: El andador

para bebés puede

utilizarse en tres

alturas diferentes.

PARA ENSAMBLAR EL ANDADOR

IMPORTANTE: Nunca cambie la altura si el

bebé está en el andador.

Bekijk gratis de handleiding van Baby Trend Smart Steps Dine N' Play 3-in-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.