Baby Trend Smart Steps Bounce N’ Play 3-in-1 handleiding

Niet gecategoriseerd

Baby Trend

18 pagina's

PDF beschikbaar

Handleiding

ASSEMBLYASSEMBLY

109

Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.

SWIVEL SEAT MODE

• Insert each leg into the

underside of the tabletop

(Fig. 1a).

NOTE: Ensure that the pin

clicks into position.

• Align the seat to the

center opening and press

it down rmly. The seat

must completely click into

to the tabletop (Fig. 1b).

NOTE: Rotate the seat

to ensure the swivel

function is active.

• To attach and detach the

seat cover, see step 7.

ADJUSTABLE PLATFORM SET UP

• Underneath the tabletop

pinch and pull out the 3

small straps (Fig. 3a).

Underneath the platform

unhook the 3 adjustment

plates, pinch and pull out the

3 large straps (Fig. 3b).

• With the smooth side up,

align the pointed side of

the platform to the front

of the tabletop. Hook the

adjustment plate to small

strap using the lowest hoop

(Fig. 3c). Repeat for the rear

straps.

• To adjust the height, unhook

the adjustment plate and put

it through the next division of

the strap (Fig. 3d).

• ATTENTION: Always secure

the straps when the platform

is not in use. Refer to step

4c and 4d.

“Click”

Fig. 1a

Fig. 3a

Fig. 3b

Fig. 3c Fig. 3d

Fig. 1b

Fig. 2

lift from edge

SEAT REMOVAL

• To remove the seat, use

the edge of the seat to lift it

off the tabletop (Fig. 2).

Bekijk gratis de handleiding van Baby Trend Smart Steps Bounce N’ Play 3-in-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.