Baby Trend Smart Steps Bounce N' Glide 3-in-1 handleiding

Niet gecategoriseerd

Baby Trend

16 pagina's

PDF beschikbaar

Handleiding

MAINTENANCE

UNFOLD

Fig. 11a

lift from edge

• SEAT REMOVAL:

To remove the seat, use

the edge of the seat to

lift it off the tabletop

(Fig. 11a).

• Ensure all the toys are

removed, and the seat.

• TABLETOP:

To remove, push the 3

pins located on each

table leg (Fig. 11b).

Repeat the process for

the other table legs.

• 3 TABLE LEGS:

To remove, locate

the tab underneath

the base. Pull the

tab towards you and

remove the leg

(Fig. 11c). Repeat

for the other sides.

DISASSEMBLING THE ACTIVTY CENTER

Ensure all the toys are removed from the tabletop

before disassembling.

Fig. 11b

Fig. 11c

Fig. 12a

Fig. 12b

SEAT FABRIC

DO NOT MACHINE WASH. For

metal and plastic parts, use only

lukewarm water and mild soap.

• To remove the seat fabric for

maintenance, pull out all the

plates from the tab on the seat

base (Fig. 12a).

• To reattach the fabric, insert the

warning label side towards the

backrest of the seat base. Fold

the fabric over and insert the

rear center plate into the tab.

Continue to connect all plates

around the seat base tabs.

All plates and tabs must be

secured before use (Fig. 12b).

• The Stoppers are there

for Stair Safety reasons,

do NOT remove the

stoppers unless for

replacement purposes.

• REMOVAL: To remove,

pull out the stopper

(Fig. 13a).

• REATTACH: Push the

stopper into the housing

completely (Fig. 13b).

Ensure to apply enough

pressure when inserting

the stoppers.

STOPPER REPLACEMENT

For replacement, if lost or damaged ONLY.

Fig. 13a

Fig. 13b

Bekijk gratis de handleiding van Baby Trend Smart Steps Bounce N' Glide 3-in-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.