Baby Lock Splendor BLSP8 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182/ 82

Afdrukken

Je bekijkt pagina 63 van 82

1

2

3

C

1

2

3

C

1

2

3

C

1

2

3

C

To lock the end of the seam:

1. Take one stitch off the end of the fabric (fig. A).

2. Raise the presser foot and bring the needle(s) to the highest

position. Gently pull back on the fabric to clear the stitch fin

-

gers.

3. Carefully turn the fabric over, end to end (fig. B), and reposition

it under the presser foot with the needle at the seam edge, and

aligned with the previous needle stitch (fig. C).

4. Lower the presser foot and sew 5-6 stitches over the previous

stitches, being careful not to cut them. You may want to turn

the cutting blade locking dial clockwise to the "LOCK" position.

Pivot the fabric and chain off (fig. D - E).

BB

CC

DD

EE

Securing Ends – Overlock

The serger stitch will not easily unravel, and in most cases serged

seams are secured by an intersecting seam. If that's not the case,

these are several options for securing seams (fig. A).

1. Leave a 3 inch (75mm) chain, separate the threads and tie a knot.

2. Apply a dot of seam sealant on the thread chain at the fabric

edge. Allow to dry and cut off the excess thread chain.

3. Leave a 3-4 inch (75-100mm) thread chain and using a large-

eye tapestry needle or double-eyed needle weave the chain

back into the stitching.

4. Lock the beginning or end of a seam by serging over the previ

-

ous stitches.

To lock the beginning of the seam:

1. Manually turn the handwheel toward you taking 2-3 stitches into

the fabric. Leave the needle(s) in the lowest position to anchor

the fabric.

2. Raise the presser foot.

3. Smooth out the thread chain with your fingers (fig. B). Bring the

thread chain toward you and under the foot, aligning it with the

edge of the fabric (fig. C).

4. Lower the foot and continue sewing, catching the thread chain

in the stitches for about 1inch (25mm). Let the cutting blades cut

off any remaining thread chain (fig. D-E).

AA

BB

CC

DD

EE

AA

60

T

E

C

H

N

I

Q

U

E

S

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182/ 82

Bekijk gratis de handleiding van Baby Lock Splendor BLSP8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd