Baby Lock Splendor BLSP8 handleiding
Handleiding
Je bekijkt pagina 29 van 82
7.0
7.5
3
4
2
5.0
4.5
BL
2
O
2
1
1
3
4
7.0
7.5
3
4
2
5.0
4.5
BL
2
O
2
1
1
3
4
7.0
7.5
3
4
2
5.0
4.5
BL
2
O
2
1
1
3
4
7.0
7.5
3
4
2
5.0
4.5
BL
2
O
2
1
1
3
4
7.0
7.5
3
4
2
5.0
4.5
BL
2
O
2
1
1
3
4
7.0
7.5
3
4
2
5.0
4.5
BL
2
O
2
1
1
3
4
AA
BB
CC
Clearing the Stitch Width Fingers
As you sew, you will discover that maneuvering the fabric
is different from conventional sewing because the threads
form around the stitch fingers (fig. A).
To clear the stitch fingers, simply raise the presser foot,
which releases all threads. Raise the needle(s). Then gen
-
tly pull the threads from behind the foot (fig. B).
Note: If needed pull slack in both the needle and looper
threads before pulling on the thread chain.
The stitches are now released from the stitch fingers (fig. C).
Re-threading Loopers
If a thread breaks, raise the presser foot and pull the broken thread out from under the foot. Open
the front cover and engage the threading lever (see page 19).
Re-thread the machine above the threading port, leaving a 22 inch (550mm) thread tail. Thread
the looper as usual then engage the threading lever to the serging position (see pages 19/22).
Close the front cover and sew a test sample.
NOTE: When re-threading your Baby Lock Splendor using the "Extraordin Air Threading System"
feature, make sure that the previous thread that was in the looper (tube) is completely
removed. This will eliminate any chance of the previous thread obstructing the flow of the
air when re-threading the loopers.
T
H
R
E
A
D
I
N
G
26
Bekijk gratis de handleiding van Baby Lock Splendor BLSP8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Splendor BLSP8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18882 MB |