Baby Lock Regalia Longarm handleiding
Handleiding
Je bekijkt pagina 67 van 71
Regalia User Manual | 67
Tension is Poor Correcve Measure(s)
Lint caught under the tension
spring in the bobbin
• If using short staple threads, inexpensive, or industrial threads,
or coated threads, lint and other material will build up under the
tension spring and begin to li the spring, reducing the spring’s
ability to compress against the thread. Insert a pin or the corner
of a business card under the spring and clear out the lint. The
bobbin tension will return fairly close to its preset tension. Test the
tension before quilng.
Hand Wheel Won’t Rotate Correcve Measure(s)
Thread is entangled and caught
in the hook
• There may be a thread lock. With the machine on, use the on-
screen hand wheel to break the thread lock. Quickly move
your nger down and up several mes. If this doesn’t solve the
problem, turn the machine o and use the hand wheel at the
back of the machine to resolve the thread lock.
There is a thread lock. • Carefully rock or turn the hand wheel in direcon of moon and
then the other direcon unl the thread lock breaks free. Once
the hand wheel can be turned freely, remove the thread from
the hook and basket. Now re-oil the hook and make sure the
hand wheel turns freely without the hook hing the needle. It is
possible for a thread lock to cause a ming problem.
Thread Nests Under Quilt Correcve Measure(s)
Not enough tension on top
thread
• Check that the machine is threaded correctly. Make certain that
the thread is ossed snugly in place between the two tension
discs. If the machine is threaded correctly, ghten top tension by
rotang the tension knob clockwise. (For more informaon about
adjusng tension, see Bobbin and Bobbin Tension and Quick-Set
Tension in the Using Your Machine secon of this manual.)
Improper threading • Refer to threading diagram and threading instrucons.
Thread Backlash Correcve Measure(s)
Bobbin thread tangles within
the bobbin case, tangles and
winds onto the hook spindle, or
occasionally forms loops on the
boom of the quilt
• Make sure the bobbin is in the bobbin case correctly and the
thread is coming out from under the tension spring. The bobbin
should rotate clockwise when the thread is pulled.
Hard to Guide Machine Correcve Measure(s)
Carriage wheels not centered
on track
• Center the carriage wheels on top of the connuous track. Check
that the machine carriage has not jumped the track.
Thread caught in wheels • Remove all thread or debris in wheels. Check that the tracks are
free of lint and threads.
Bekijk gratis de handleiding van Baby Lock Regalia Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Regalia Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20188 MB |
