Baby Lock Regalia Longarm handleiding
Handleiding
Je bekijkt pagina 32 van 71
32 | www.BabyLock.com
Threading the Machine
Baby Lock recommends that you select and use only high-quality threads for your quilts.
1
2
3
4
6
8
5
9
10
11
12
7
To thread the machine
1. Place thread cone onto spool post ① on the thread tray, insert the thread through the thread-mast
eyelet ② from back to front, connuing to the thread guide ③.
2. Connue to the three-hole thread guide ④. Wrap all three holes from back to front, being careful
not to cross threads. This is recommended for most threads. However, some very delicate threads
or metallic threads may require less tension. If you are having problems with thread breaking, try
threading only one or two holes of three-hole thread guide.
3. The thread connues down to thread guide ⑤ just above the top tension and then on to the top
tension assembly ⑥.
 IMPORTANT: The thread must be ossed up between the two tension discs. If the thread is not
rmly in place between the two tension discs, the thread will lay on top of the tension discs (no
tension) and thread looping on the boom of the quilt can occur.
Bekijk gratis de handleiding van Baby Lock Regalia Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Regalia Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20188 MB |
