Baby Lock Regalia Longarm handleiding
Handleiding
Je bekijkt pagina 30 van 71
30 | www.BabyLock.com
To insert the bobbin case into the machine
1. Move the needle to the up posion. Turn o the power to the machine using the front buon.
2. Place the bobbin in the bobbin case so that the thread pulls o clockwise when viewing the
open side.
3. Slide the thread through the slot and under the tension spring, leaving 5 to 6 inches of thread
hanging loose.
4. To t the bobbin case onto the hook spindle
in the machine, orient the bobbin case as
shown in the photo with alignment notch to
the right. Push the bobbin case inward unl it
clicks into place.
NOTE: Do not insert the bobbin case into the machine by liing the lever on bobbin case. Use the
lever only for removing the bobbin case.
Quick-Set Tension™
One of the joys of quilng with the Regalia is its ability to handle many dierent types of thread. You can
quilt with almost any high-quality thread as long as you rst adjust the bobbin tension and then adjust the
top tension to suit the thread you’ve chosen.
Puckering, gathers, and thread breakage occur when the top tension is too ght. Loops and thread nests
occur when the top thread tension is too loose. Tension may need to be adjusted depending on the fabric,
thread, or bang you are using on the project.
NOTE: Top tension should be adjusted aer the bobbin case tension adjustment is made.
NOTE: Dark threads will be thicker (because of dye) than light threads of the same weight and may
require a tension adjustment. The type or brand of thread may also aect tension sengs. Each
me you change threads, you should check your tension.
 IMPORTANT: Before adjusng your top tension remember to oss the top thread up between the
tension discs or it will oat outside the discs providing lile or no top tension. This could cause
signicant tension or thread nesng problems.
QUILTING TIP: Test the tension sengs before quilng. The best way to make sure the top and
boom tension sengs are balanced is by quilng. Keep 4-inch squares of light solid fabric on hand
to place at the side of the quilt on the extra bang and backing. Then quilt some loops and swirls
and look at the stches on top and underneath to ensure the tension looks good. Fine tune the
tension as needed.
Bekijk gratis de handleiding van Baby Lock Regalia Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Regalia Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20188 MB |
