Baby Lock Regalia Longarm handleiding
Handleiding
Je bekijkt pagina 23 van 71
Regalia User Manual | 23
3. Slide the laser clamp onto the mounng post
and ghten the two knobs on opposite sides of
the clamp.
4. Plug the laser cable end into the laser stylus
port on the back of the machine. This is found
on the tension side of the machine inset in the
rectangular shaped opening.
The laser projects a straight laser beam visible as a dot on surfaces it hits. The laser dot is used as a guide
or stylus enabling you to use printed pantograph designs and stch the paern onto a quilt by tracing the
design with the laser dot.
The laser aaches to a mounng post which aaches to the machine. The laser stylus can move in any
direcon by rotang the clamp on the post and pivong the laser up or down. To make an adjustment,
simply loosen the black thumbscrews, posion, and re-ghten.
 IMPORTANT: A label is aached to the laser’s case and contains an arrow which indicates the
direcon of the laser light when energized. The label must remain in place on the laser. Removing
the label voids the laser’s warranty.
Bekijk gratis de handleiding van Baby Lock Regalia Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Regalia Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20188 MB |
