Baby Lock Regalia Longarm handleiding
Handleiding
Je bekijkt pagina 21 van 71
Regalia User Manual | 21
Thread Stand and Thread Mast
To install the thread stand on the machine
1. Locate the two small M4x10mm hex buon head screws and the thread mast assembly.
2. Align the screws in the thread stand bracket
with the two holes in the side of the machine
(top tension side). Use a 2.5mm Allen wrench to
ghten the bracket rmly to the side of
the machine.
Regalia Ruler Base (Oponal Accessory)
If you plan to use rulers and templates with the Regalia, you will need to purchase the ruler base to give
you a large, stable surface on which to rest the ruler or template. The ruler base and rulers and templates
are oponal accessories. For more informaon, visit hp://www.babylock.com.
To install the ruler base
1. The Regalia machine comes with four
preinstalled mounts for the ruler base.
2. With the Regalia Ruler Base lted down about
30°, align the back ruler-base hooks with the
machine mounts unl they are about to catch,
then lower the front of the ruler base unl the
front hooks align and catch, also. With all four
ruler-base hooks aligned and started onto the
machine mounts, push the ruler base back into
the nal posion.
To remove the ruler base
• Grasp the front corners of the ruler base, pull
the ruler base towards you and then up on an
angle o the machine.
Bekijk gratis de handleiding van Baby Lock Regalia Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Regalia Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20188 MB |
